EDAC 400-02

The EDAC 400-02 is a product that saves you time, saves you money and can even save a life.

This auto dialler utilises user recorded voice messages to call a phone when triggered by clean contact, voltage or ground the dialler will call the first number on the call list and speak a message.

The EDAC 400-02 monitors security, high/low temperatures, high/low levels, movement and on/off detection and equipment failures. The dialler alerts whoever needs to know, when you need to know and automatically tells you what you need to know.

If you are considering an alternative to a standard phone line we can assist with both GSM and NextG options compatible with your choice of Autodialler.

Features

Up to 4 independent trigger inputs
Voice message
Dial in interrogation voice messages
Voice messages and parameters held in non-volatile memory and user programmable
20 digit phone numbers, including PABX pauses
One list of sixteen phone numbers or separate lists for each input
Voice recorded via onboard microphone
On-board monitor speaker
Up to four outputs for alarm acknowledgment indication or independent operation via DTMF
Full pin security
Uses existing telephone lines
Compatible with cellular networks
RS232/keypad programming
RS232 triggering
Remote DTMF Roster change
Latching or momentary inputs
Four rosters changeable via telephone call
RS232 connection monitor
Remote programmable via telephone

Connections

Inputs, outputs and power connect via 8 way removable screw terminal block
RS232: Use straight through cable, Input 1 =DTP
Inputs: Programmable N/0, N/C, Momentary or internally latched
Outputs: 4 transistor outputs (open drain) protected for inductive loads
Power: 10 - 15Vdc @ 4OmA nominal 80-100mA when dialling
Telstra line: International RJ1 1 socket (as found on modem cards).A country specific line cord is provided. (Inner pins of RJ11 to phone line)
An additional RJ11 socket provided for pass-through

Messages

User recordable 8-second alarm voice message per input, 4 second for site message & idle message
20 Digit numeric per input - Program parameters spoken if altered remotely
Output state spoken
Acknowledge output

Applications

Security
High/low temperatures
High/low levels
Movement and on/off detection
Equipment failures
Process monitoring
All type of monitoring and alarm situations

Programmable Parameters

Telephone numbers: 20 digits, up to 4 No's. per input or 1 common list of 16 numbers
Dialling mode: DTMF
Rosters: 4
Trigger Capable: Momentary/Latched Normally open/closed To ground, to positive
PIN protected
All functions can be programmed using the keypad & display, PC via the RS232 connector or remotely using a telephone.

Size and Weight

192mm x 110mm x 34mm.
Approx. 300grams

If you intend using this auto-dialler with a fixed wireless terminal (GSM/NextG/3G) device to utilise outputs, please contact our office before doing so.

400-02 brochure (338.19 kB)

icon EDAC 400-02 User Manual (586.42 kB)

400 Programming Sheets (35.5 KB)