• EDAC auto alarm daialler 222

EDAC 222

The EDAC222-02 has 2 trigger inputs and 2 controlled outputs plus many additional features. The auto dialler can be set up to monitor security systems, essential equipment and processes. It may be used with any combination of triggers. Upon the occurrence of an alarm event the EDAC222-02 is triggered and will automatically call the list of pre-programmed telephone numbers, cellular/mobile phone  numbers associated with the trigger input. A user recorded voice message associated with the trigger will then be communicated to the dialled connection.

This level of functionality and flexibility enables the EDAC222-02 to be a cost-effective platform for essential monitoring and control in a variety of applications. It eliminates the expense of third party monitoring and enables contact to be made directly with the people that need to be informed.

Product Description

A cost-effective solution for remote monitoring!

  • Monitor two alarm inputs and report directly to the people most capable of correcting the problem.
  • Control of two appliances via the outputs.
  • The EDAC222-02 has 2 trigger inputs and 2 controlled outputs plus many additional features. The auto dialler can be set up to monitor security systems, essential equipment and processes. It may be used with any combination of triggers.
  • Upon the occurrence of an alarm event the EDAC222-02 is triggered and will automatically call the list of pre-programmed telephone numbers, cellular/mobile phone  numbers associated with the trigger input.
  • A user recorded voice message associated with the trigger will then be communicated to the dialled connection.
  • The EDAC222-02 has the ability to independently control 2 outputs.
  • This level of functionality and flexibility enables the EDAC222-02 to be a cost-effective platform for essential monitoring and control in a variety of applications. It eliminates the expense of third party monitoring and enables contact to be made directly with the people that need to be informed.

If you are considering using an alternative to a standard land line we can assist you with both GSM and NextG options, compatible with your choice of Autodialler.

Additional Information

Number of Inputs

2

Communication Type

Phone Line, Cellular

Data Logging

No

Notification

Voice Phone Call

Supported Sensor Types

Contact Type

Capabilities

  • 2 independent trigger inputs
  • user recordable 8 second audio message per input and user recordable 4 second site message
  • Voice messages held in non volatile memory.
  • List of 16 telephone numbers or 4 seperate lists of 4 numbers
  • 2 outputs which can be operated remotely
  • Full PIN security
  • Cost effective
  • Direct communication with those who are most capable of solving problems
  • Uses existing telephone lines
  • Compatible with cellular phones in lieu of standard phone lines
  • AUSTEL APPROVED

If you intend using this auto-dialler with a fixed wireless terminal (GSM/NextG/3G) device to utilise outputs, please contact our office before doing so.

EDAC strongly recommends all EDAC diallers have our Surge Protection Units(SPU) and Power Supply with Battery Back UP(PS12).  If the EDAC 222 or EDAC 400 don’t have a PS12, they will require our plug pack.

Tech Specs

MECHANICALSize: 192mm x 110mm x 34mm

Weight: 300grams

SPECIFICATION DESCRIPTION
PROGRAMMABLE PARAMETERS • 1 list of 16 telephone/pager numbers or 4 separate lists of 4 numbers
• 1 pager message per input
• Up to 20 digits for telephone or pager number
• Message play time between 1 and 9 minutes
• Ring back delay time between 0 and 9 minutes
• DTMF dialling mode
• 4 Rosters
• 4 digit security PIN
(All functions are programmed using the keypad and 7 segment display.)
MESAGES • User recordable 8 second audio message per input.
• User recordable 4 second Site message
• 20 digit numeric pager message per input
• Spoken input and output state
• Acknowledge output message
• Telephone and Pager messages can be mixed.
CONNECTIONS
Input, Output and Power Connect via a 6 way screw terminal block.
Trigger Inputs Programmable as either Normally Open or Normally Closed. Momentary or Internally Latched. Default input is a voltage free, clean closing contact to ground (negative).
Outputs 2 independent open collector outputs protected for inductive loads and capable of switching a maximum of 125mA and 48V. Maximum Power is 500mW.
Telecom Line 2 standard RJ11 sockets allow connection between wall socket and existing phone.
POWER REQUIREMENTS 12V nominal (10V to 15V)

Maximum 120mA Standby 50mA

(48V version available)

COMPLIANCE AND APPROVALS Radiated Radio frequency CSPR22

Electrostatic discharge CSPR24

C-Tick, A-Tick and CE compliant

Brochures/User Manual



Reviews

There are no reviews yet.

Be the first to review “EDAC 222”