• EDAC EDAC auto alarm daialler 400

EDAC 400

The EDAC 400-02 is a product that saves you time, saves you money and can even save a life.

This auto dialler utilises user recorded voice messages to call contacts when alarms are triggered.

The EDAC 400-02 monitors security, high/low temperatures, high/low levels, movement and on/off detection and equipment failures. The dialler alerts whoever needs to know, when you need to know and automatically tells you what you need to know.

Product Description

A product that saves you time, saves you money and can even save a life!

The EDAC 400 has four I/O which can be used in any combination of trigger inputs or controlled outputs.

  • Upon the occurance of an alarm event the EDAC 400 is triggered and will automatically call the list of programmed telephone, cellphone or pager numbers associated with the trigger input.
  • A user recorded voice or alpha-numeric pager message associated with the trigger will then be communicated to the dialled connection.
  • The EDAC400 has the ability to independently control four outputs. The condition of the outputs can be used to indicate the status of the EDAC400 inputs, control appliances, or may be switched remotely through the telephone system.
  • The EDAC 400 is a cost effective platform for essential monitoring and control in a variety of applications. It eliminates the expense of third parties and enables contact to be made directly with those who need to be informed.

If you are considering an alternative to a standard phone line we can assist with both GSM and NextG options compatible with your choice of Autodialler.

Additional Information

Number of Inputs


Communication Type

Phone Line, Cellular

Data Logging



Voice Phone Call

Supported Sensor Types

Contact Type


  • Up to 4 independent trigger inputs
  • Voice message
  • Dial in interrogation voice messages
  • Voice messages and parameters held in non-volatile memory and user programmable
  • 20 digit phone numbers, including PABX pauses
  • One list of sixteen phone numbers or separate lists for each input
  • Voice recorded via onboard microphone
  • On-board monitor speaker
  • Up to four outputs for alarm acknowledgment indication or independent operation via DTMF
  • Full pin security
  • Uses existing telephone lines
  • Compatible with cellular networks
  • RS232/keypad programming
  • RS232 triggering
  • Remote DTMF Roster change
  • Latching or momentary inputs
  • Four rosters changeable via telephone call
  • RS232 connection monitor
  • Remote programmable via telephone

If you intend using this auto-dialler with a fixed wireless terminal (GSM/NextG/3G) device to utilize outputs, please contact our office before doing so.
EDAC strongly recommends all EDAC Diallers have our Surge Protection Units(SPU) and Power Supply with Battery Back Up(PS12). If the EDAC 222 or EDAC 400 don’t have a PS12, they will require our plug pack.

Tech Specs

• High/low temperatures
• High/low levels
• Movement and on/off detection
• Equipment failures
• Process monitoring
• All type of monitoring and alarm situations

PROGRAMMABLE PARAMETERS • Telephone numbers: 20 digits, up to 4 No’s. per input or 1 common list of 16 numbers
• Dialling mode: DTMF
• Rosters: 4
• Trigger Capable: Momentary/Latched Normally open/closed To ground, to positive
• PIN protected
• All functions can be programmed using the keypad & display, PC via the RS232 connector or remotely using a telephone.
MESAGES • User recordable 8-second alarm voice message per input, 4 second for site message & idle message
• 20 Digit numeric per input – Program parameters spoken if altered remotely
• Output state spoken
• Acknowledge output
Input, Output and Power Connect via 8 way removable screw terminal block
RS232 Use straight through cable, Input 1 = DTP
Inputs Programmable N/0, N/C, Momentary or internally latched
Outputs 4 transistor outputs (open drain) protected for inductive loads
Power 10 – 15Vdc @ 4OmA nominal 80-100mA when dialling
Telstra line International RJ1 1 socket (as found on modem cards). A country specific line cord is provided. (Inner pins of RJ11 to phone line)An additional RJ11 socket provided for pass-through
SIZE AND WEIGHT 192mm x 110mm x 34mmApprox. 300grams

Brochures/User Manual


There are no reviews yet.

Be the first to review “EDAC 400”