Bun THERMO II
Two channel temperature recorder and alarm system with two external sensors.
About the product
bun THERMO II is a temperature recorder -55°C to +125°C (-67°F to +257°F) and cloud-based alarm system with two external sensors. This product monitors two assets with one device, however if you require one external sensor only, please view bun THERMO X.
It comes with two external temperature sensors in a stainless-steel pocket with 1.5 metre (5 ft.) length cables providing temperature measurement accuracy of ± 0.5 (± 0.9 °F).
bun THERMO II is powered by 2 replaceable AA batteries for up to 6 years* and connects directly to Wi-Fi. An external power pack is also available. This enables more frequent data uploads and preserves the battery as a backup only.
All setting parameters such as – measurement intervals, upload intervals, minimum, and maximum allowed temperature thresholds – can be set through a web-based application on any platform and adjusted remotely.
bun THERMO II sends out email and text message alarms as soon as the thresholds are exceeded or fall below those pre-set, allowing you to take action.
The advantage of automatically logging frequent data (every 1 minute to 120 minutes) is the ability to access historical records including graphs and periodical reports for reporting and review without the manual labour.
Both hardware and software installation are simple and do not require any specific tools, professional installers, or applications. See further information on features included in all bun family products.
Note: upload temperature range is the ambient condition required for the device to stay fully operational. These operations include being able to connect and sync with the cloud and send out alarms. However, the device can continue recording the data in its internal memory while in temperature measurement range.
*Depending on frequency of reading and upload intervals and environmental conditions. Battery life is more than 6 years in a standard set up (Operating Room temperature 20°C. Measurement every 15 minutes. Upload every 48 hours).
SPECIFICATIONS
Sensor | 2X 1.5 meter (5 ft.) External temperature sensor (Stainless steel) |
---|---|
Temperature measurement and alarm range (Sensor only)* |
°C -55 to +125 °F -67 to +257 |
Upload temperature range* | °C -5 to +70 °F 20 to +160 |
Temperature measurement Accuracy | °C ± 0.5 (± 0.9 °F) |
Power supply | 2 x AA replaceable batteries Battery life up to 6 years* IMPORTANT – Optional: Mains Powered by additional USB Charger. This enables more frequent data uploads and preserves battery as a backup only. |
Sensor‘s protection class | IP 67 |
Compliances | IEEE 802.3, EN 61326-1, EN 61010, EN 12830, FCCID: 2AHMR-ESP12F, CE, ROHS, HACCP |
Upload intervals | One hour to once a week (or on demand) |
Record intervals | 1 minute to 120 minutes (down 2 sec. by order) |
Interface | Wi-Fi IEEE 802.11b — 2.4 GHz |
Max. number of internal records | 16,384 — Automatic cloud sync and replace |
AMBIENT CONDITIONS
Storage temperature | °C | -25 to +75 |
---|
DIMENSIONS
Diameter (max.) | L | mm 80.0 |
---|---|---|
Height (max.) | H | mm 34.5 |
APPLICATION
- Fridge/Freezers/Incubators — i.e. food and beverage
- HVAC & Boiler
- Concrete pouring
- Data Rooms/CREMs
- Class room or office, museum, warehouse
- Refrigeration/Cool Stores — i.e Perishable/Cold Storage
- Meet regulations — i.e. Pharma/Vaccines
Warranty
3 Years (2 years manufacturer‘s warranty + 1 year EDAC warranty)
Shipping
Free shipping in Australia
Price $340 AUD + GST
Add a Power Pack to your cart. $70Add to cart
Enables more frequent data uploads and preserves battery as a backup only.