Bun THERMO X
Temperature recorder and alarm system with one external sensor.
About the product
bun THERMO X is a temperature recorder -55°C to +125°C (-67°F to +257°F) and cloud-based alarm system with an external sensor.
It comes with an external temperature sensor in a stainless-steel pocket with a 1.5 metre (5 ft.) length cable providing temperature measurement accuracy of ± 0.5°C (± 0.9°F).
bun THERMO X is powered by 2 replaceable AA batteries for up to 6 years* and connects directly to Wi-Fi. An external power pack is also available. This enables more frequent data uploads and preserves the battery as a backup only.
All setting parameters such as – measurement intervals, upload intervals, minimum, and maximum allowed temperature thresholds – can be set through a web-based application on any platform and adjusted remotely.
bun THERMO X sends out email and text message alarms as soon as the thresholds are exceeded or fall below those pre-set, allowing you to take action.
The advantage of automatically logging frequent data (every 1 minute to 120 minutes) is the ability to access historical records including graphs and periodical reports for reporting and be able to review without the manual labour.
Both hardware and software installation are simple and do not require any specific tools, professional installers, or applications. See further information on features included in all bun family products.
Note: upload temperature range is the ambient condition required for the device to stay fully operational. These operations include being able to connect and sync with the cloud and send out alarms. However, the device can continue recording the data in its internal memory while in temperature measurement range.
*Depending on frequency of reading and upload intervals and environmental conditions. Battery life is more than 6 years in a standard set up (Operating Room temperature 20°C. Measurement every 15 minutes. Upload every 48 hours).
SPECIFICATIONS
| Sensor | 1.5 meter (5 ft.) External temperature sensor (Stainless steel Pocket) |
|---|---|
| Temperature measurement and alarm range (Sensor only)* |
°C -55 to +125 °F -67 to +257 |
| Upload temperature range* | °C -5 to +70 °F 20 to +160 |
| Temperature measurement Accuracy | °C ± 0.5 (± 0.9 °F) |
| Power supply | 2 x AA replaceable batteries Battery life up to 6 years* IMPORTANT – Optional: Mains Powered by additional USB Charger. This enables more frequent data uploads and preserves battery as a backup only. |
| Sensor‘s protection class | IP 65 |
| Compliances | IEEE802.11, EN 61326-1, EN 61010, EN 12830, FCCID: 2AHMR-ESP12F, CE, ROHS, HACCP |
| Upload intervals | One hour to once a week (or on demand) |
| Record intervals | 1 minute to 120 minutes (down 2 sec. by order) |
| Interface | Wi-Fi IEEE 802.11b — 2.4 GHz |
| Max TX power | 802.11 b: +20 dBm |
| Rx Sensitivity | 802.11 b: —91 dbm (11 Mbps) |
| FCC ID | 2AHMR-ESP12F |
| Max. number of internal records | 16,384 — Automatic cloud sync and replace |
AMBIENT CONDITIONS
| Storage temperature | °C | -25 to +75 |
|---|
DIMENSIONS
| Diameter (max.) | L | mm 80.0 |
|---|---|---|
| Height (max.) | H | mm 34.5 |
APPLICATION
- Fridge/Freezers/Incubators — i.e. food and beverage
- HVAC & Boiler
- Concrete pouring
- Data Rooms/CREMs
- Class room or office, museum, warehouse
- Refrigeration/Cool Stores — i.e Perishable/Cold Storage
- Meet regulations — i.e. Pharma/Vaccines
Warranty
3 Years (2 years manufacturer‘s warranty + 1 year EDAC warranty)
Shipping
Free shipping in Australia
Price $264 AUD + GST
Add a Power Pack to your cart. $70Add to cart
Enables more frequent data uploads and preserves battery as a backup only.